Full catalogue

Parts from one source.

Search by part name, maker or number - or filter by section. Every item comes with documentation and a quote on request, no price list and no commitment.

121 items

01 · Engine and propulsion

Fuel injection plunger

Precision plunger-and-barrel element for the fuel pump, lapped as a matched pair and nitrided to resist scuffing on heavy fuel.

Price on request5-15 working days

01 · Engine and propulsion

Crankpin bolt

Forged connecting-rod big-end bolt with rolled thread and controlled torque, for high fatigue-cycle joints.

Price on request5-15 working days

01 · Engine and propulsion

Auxiliary engine crankshaft

Crankshaft for the genset, journals reground and NDT-checked, supplied ready to fit with matched bearings.

Price on request10-25 working days

01 · Engine and propulsion

Auxiliary engine frame assembly

Complete auxiliary engine frame with main bearing saddles, machined and checked for main-bore alignment.

Price on request10-25 working days

01 · Engine and propulsion

Valve seat

Inlet or exhaust valve seat in alloy steel, ground for a hot seal and resistant to exhaust-gas erosion.

Price on request5-15 working days

01 · Engine and propulsion

Upper cooling jacket

Upper cylinder cooling jacket with water passages, matched to the engine type and its ring seals.

Price on request5-15 working days

01 · Engine and propulsion

Lower cooling jacket

Lower cylinder cooling jacket with O-ring grooves, supplied with the seal set for an overhaul.

Price on request5-15 working days

01 · Engine and propulsion

Fuel valve spindle guide

Fuel valve spindle guide lapped for tightness, holding needle alignment under high injection pressure.

Price on request5-15 working days

01 · Engine and propulsion

Pneumatic control valve

Pneumatic valve for the main engine start and control air, with an oil- and heat-resistant diaphragm and seat.

Price on request5-15 working days

01 · Engine and propulsion

Piston skirt

Low-speed engine piston skirt, guide flange with a running coating, matched together with the crown and rings.

Price on request5-15 working days

01 · Engine and propulsion

Piston ring set

Piston ring set - compression and oil rings, chrome- or plasma-coated, matched to the bore and piston grooves.

Price on request5-15 working days

01 · Engine and propulsion

Piston crown

Main engine piston crown in heat-resistant steel with oil-cooling bores, crown face NDT-checked.

Price on request10-25 working days

01 · Engine and propulsion

Cylinder liner

Alloy cast-iron cylinder liner with plateau honing, lubrication ports and a sealing collar under the cover.

Price on request10-25 working days

01 · Engine and propulsion

Piston parts set

Complete main-engine piston overhaul set - crown, skirt, rings and rod - matched as a pair with the liner.

Price on request10-25 working days

01 · Engine and propulsion

Exhaust valve spindle

Exhaust valve spindle with a Stellite-faced seat, resistant to high-temperature heavy-fuel corrosion.

Price on request5-15 working days

01 · Engine and propulsion

Cylinder cover

Cylinder cover with valve seats and cooling passages, pressure-tested and crack-checked, complete with seals.

Price on request10-25 working days

01 · Engine and propulsion

Fuel injector

Complete main-engine fuel injector with nozzle, opening pressure set and leak-tested on the bench.

Price on request5-15 working days

01 · Engine and propulsion

Turbocharger casing

Auxiliary engine turbocharger turbine casing with the gas passage, cleaned and dimensionally checked for the rotor.

Price on request10-25 working days

02 · Pumps, valves and hydraulics

Expansion bellows

Expansion bellows for ship piping, absorbing thermal movement and vibration, in a stainless-steel build.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Hydraulic oil filter

Pressure filter for the hydraulic system with a 10-25 µm element and bypass valve, for deck machinery.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

Hydraulic hose

High-pressure hose with steel braid, crimped to length with end fittings to drawing or sample.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

Hand pump

Hand pump for transferring fuel, oil and water, with check valves, as an emergency or service pump.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

Pump coupling

Flexible coupling between motor and pump, with a vibration-damping element, selected by torque and shaft sizes.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Hydraulic motor-pump unit

Complete unit - hydraulic pump driven by a motor, with relief valve and fittings, to mount on deck machinery.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Hydraulic pump

Gear or piston hydraulic pump for power systems, selected by the flow and working pressure of the circuit.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Valve block

Stop-check valve block with a manifold, machined from a single body, for media distribution in the engine room.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Storm valve

Storm valve for deck scuppers, self-closing against boarding water, in a seawater-resistant bronze build.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Safety valve

Spring-loaded safety valve with a set pressure and seal, tested and adjusted, with a setting certificate.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Non-return valve

Lift-type non-return valve preventing backflow, in a bronze or cast-steel body, selected by size and direction.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Progressive cavity stator

Progressive cavity pump stator with rubber vulcanised into the shell, matched to the rotor and media viscosity.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Pump shaft

Centrifugal pump shaft in stainless steel, journals reground for the seal and bearings, ready to fit.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Pump spare parts

Centrifugal pump spares kit - impeller, mechanical seal, wear rings, shaft and sleeves - as an overhaul set.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Mouth / wear ring

Impeller mouth ring, a wear part limiting internal leakage, sized to the assembly clearance.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Mechanical seal

Shaft mechanical seal with a carbide-ceramic face pair, for seawater, cooling and ballast pumps.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

Pump impeller

Cast bronze centrifugal pump impeller, dynamically balanced, selected by outside diameter and vane count.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Gear pump

Gear pump for lube oil and fuel, self-priming, with a relief valve and steady flow against varying pressure.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Fresh water pump

Centrifugal fresh-water cooling pump, complete with seal and fittings, selected by capacity and head.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Pump cover

Pump casing cover with the seal housing and wear ring, a machined casting for a specific pump type.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Case wear ring

Case wear ring running against the impeller, a service part that restores clearance and pump efficiency.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Ballast eductor

Jet eductor for stripping ballast tanks and bilges, with no moving parts, driven by a working water jet.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Air compressor

Starting-air compressor, two-stage with intercooling, complete with valves and fittings or as spare parts.

Price on request10-25 working days

02 · Pumps, valves and hydraulics

OWS solenoid valve

Bilge oily-water separator solenoid valve controlling discharge and recirculation, to MEPC 15 ppm requirements.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Filter element

Fuel or oil filter element, pleated with a stainless mesh or media, selected by rating and dimensions.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

Solenoid valve

Two- or three-way solenoid valve for water, air and fuel, with a marine-rated coil and manual override.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

Boiler burner nozzle

Auxiliary boiler burner atomising nozzle, calibrated for flow and spray angle for stable heavy-fuel combustion.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Dosing pump

Diaphragm dosing pump for water-treatment and sewage-plant chemicals, with adjustable output and chemical-resistant valves.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Heater

Fuel or water heater with a heating element and thermostat, marine-rated, selected by power and medium.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Plate heat exchanger

Plate heat exchanger with pressed plates and gaskets, for cooling fresh water and oil with seawater.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

BWTS strainer screen

Replacement pre-filter screen for the ballast water treatment system, stainless steel, to the system maker rating.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

BWTS check valve kit

Service kit for the BWTS check valve - disc, seat and seals - for the system periodic overhaul.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

Gasket

Flange or cover gasket cut to size from asbestos-free material, selected by size, pressure and medium.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

FWG evaporator plate

Titanium evaporator plate for the fresh water generator, seawater-resistant, matched to the unit type and size.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

FWG evaporator tube

Fresh water generator exchanger tube in CuNi or titanium, for the evaporation and condensing sections.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

FWG pump motor

Drive motor for the fresh water generator ejector pump, marine IP56, selected by power and ship voltage.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

FWG gasket set

Fresh water generator gasket set for an overhaul, in a material resistant to seawater and the unit temperature.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

FWG filter

Fresh water generator water filter with a replaceable element, protecting the plates and pumps from debris.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

FWG ejector nozzle

Fresh water generator water-ejector nozzle creating vacuum in the evaporation chamber, calibrated for flow.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Fuel oil filter

Duplex fuel oil filter with auto or manual changeover, pleated elements and a sludge trap, ahead of the injection pumps.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Strainer / filter

Basket or Y-type strainer for water and oil, with a stainless basket, as a suction or discharge filter.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

Backwash filter

Self-cleaning backwash filter for cooling water, with an automatic cleaning cycle and no flow interruption.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Purifier spares

Fuel or oil purifier spares - discs, rings, seals and bearings - matched to the separator type.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Purifier O-ring set

Purifier O-ring and seal set for a periodic overhaul, in a material resistant to fuel and the working temperature.

Price on requestex-stock, 24-48 h

02 · Pumps, valves and hydraulics

Purifier EPC-50 control module

EPC-50 purifier control panel module (OP front), the operator interface board, as a spare for a control retrofit.

Price on request10-25 working days

02 · Pumps, valves and hydraulics

Purifier operating-water valve block

Purifier operating-water valve block controlling the bowl-opening cycle, complete with solenoids and seals.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

JETS vacuum toilet

JETS vacuum system toilet with low water use, complete or as valve and control spare parts.

Price on requestex-stock, 24-48 h

04 · Electrical and automation

Marine UPS

Uninterruptible power supply backing up navigation, alarm and automation systems, marine-rated and type-approved.

Price on request5-15 working days

04 · Electrical and automation

Pressure transmitter

Pressure transmitter with a 4-20 mA output for the engine-room alarm and monitoring system, in a marine housing.

Price on request5-15 working days

04 · Electrical and automation

Marine thermometer

Marine dial thermometer with a case and thermowell, for liquid and exhaust temperature in engine-room systems.

Price on request5-15 working days

04 · Electrical and automation

Programmable starter unit

Programmable starter module for a motor or pump with protections and sequence control, replacing obsolete automation.

Price on request5-15 working days

04 · Electrical and automation

Tank level gauge

Liquid level gauge for fuel, oil and water tanks, with local and remote indication to the monitoring system.

Price on request5-15 working days

04 · Electrical and automation

Float level gauge

Float level gauge with magnetic coupling, for direct reading on tanks and bilge wells.

Price on request5-15 working days

04 · Electrical and automation

Float level controller

Float level controller with changeover contacts, driving pumps and an alarm at the limit level.

Price on request5-15 working days

04 · Electrical and automation

Generator set

Generator set - auxiliary engine with an alternator and panel, complete or as parts, sized to ship power and voltage.

Price on request10-25 working days

04 · Electrical and automation

Circuit breaker

Main switchboard or feeder circuit breaker, marine-rated, selected by current and breaking capacity.

Price on request5-15 working days

03 · Deck and mooring equipment

Deck outfitting

Deck and mooring outfitting - fairleads, chocks, bollards and deck-machinery parts - to catalogue or drawing.

Price on request10-25 working days

03 · Deck and mooring equipment

Grab

Two-scoop grab for bulk cargo, mechanical or hydraulic, complete or as jaw, linkage and cylinder parts.

Price on request10-25 working days

03 · Deck and mooring equipment

Hatch cover parts

Hatch cover parts - seals, rollers, cleats and drive components - to keep the hold weathertight to class.

Price on request5-15 working days

03 · Deck and mooring equipment

Mooring winch

Mooring winch with a drum and brake, hydraulic or electric, complete or as parts - brake bands, clutches, gears.

Price on request10-25 working days

05 · Safety and LSA

Lifeboat battery charger

Lifeboat and rescue-boat battery charger, marine-rated, keeping the boat engine ready to start.

Price on request5-15 working days

06 · Drilling platform components

U-type BOP ram

Forged BOP ram for a 21 1/4" stack rated 15,000 psi, with the rubber packer matched to the pipe diameter.

Price on request10-25 working days

06 · Drilling platform components

F-1600 mud pump spares

Fluid-end spares for the F-1600 pump - valves, seats, liners and seals - as an overhaul set.

Price on request5-15 working days

06 · Drilling platform components

Mud pump cylinder liner

Bomco 170 cylinder liner with a hardened bore, for the mud pump fluid end.

Price on request5-15 working days

06 · Drilling platform components

Mud pump rubber piston

Mud pump piston with a rubber sealing element, a fast-wearing part replaced together with the liner.

Price on requestex-stock, 24-48 h

06 · Drilling platform components

Hydraulic disc brake

API-built hydraulic disc brake for the drawworks, with service and emergency calipers.

Price on request5-15 working days

06 · Drilling platform components

Water-cooled brake WPT224

WPT224 water-cooled friction brake, absorbing the energy of lowering the string on the drawworks.

Price on request5-15 working days

06 · Drilling platform components

Drilling rotary table

Rotary table with 5,850 kN static load and 32,362 Nm torque, driving the string through the kelly bushing.

Price on request10-25 working days

06 · Drilling platform components

Pneumatic rig clutch

LT1070/200 ventilated pneumatic clutch, transmitting drive to the drawworks and mud pumps.

Price on request5-15 working days

06 · Drilling platform components

Drill pipe elevator

Y-series elevator for 88.9 mm pipe, carrying the string weight while tripping in and out.

Price on request5-15 working days

06 · Drilling platform components

Drill pipe slips

Slips for 117.5 mm pipe with replaceable die inserts, holding the string in the rotary table.

Price on request5-15 working days

06 · Drilling platform components

Handling tools 168.3 mm

Handling gear for 168.3 mm pipe - slips, elevators and die inserts for working the string on the table.

Price on request5-15 working days

06 · Drilling platform components

Explosion-proof shale shaker

Shale shaker with an ExdIIBT4 explosion-proof drive, for hazardous areas on the rig.

Price on request10-25 working days

02 · Pumps, valves and hydraulics

Flanged ball valve

Full-bore ball valve in cast or stainless steel, for quick shut-off of water, fuel and oil lines.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Wafer butterfly valve

Centric-disc butterfly valve with an EPDM or NBR seat, lever- or gear-operated, for large-diameter water systems.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Gate valve

Wedge gate valve in cast iron or steel, full-bore, for isolating seawater and ballast piping.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Relief valve

Spring-loaded stainless relief valve protecting the system from overpressure, set and sealed.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

API-pattern gate valve

API-pattern gate valve for high-pressure service, cast-steel body with flanges, for industrial and offshore use.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Swing check valve

Swing check valve in a WCB cast-steel body, flanged, preventing backflow on high-pressure lines.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Centrifugal pump

Single-stage centrifugal pump for seawater, cooling and general service, selected by capacity and head.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Piston pump

Motor-driven piston pump for oil and fuel transfer at higher pressure, self-priming.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Fuel oil supply pump

Screw or gear fuel supply pump for the main engine and boiler, with a relief valve and heating connection.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Brine pump

Brine pump for the refrigeration and evaporator system, corrosion-resistant, circulating the cooling solution.

Price on request5-15 working days

02 · Pumps, valves and hydraulics

Submersible pump

Submersible pump for dewatering holds, bilge wells and tanks, with the motor in a watertight housing.

Price on request5-15 working days

03 · Deck and mooring equipment

Roller fairleads and chocks

Roller fairleads and mooring chocks guiding lines over the bulwark, cast in steel to marine standard.

Price on request5-15 working days

03 · Deck and mooring equipment

Bollards and bitts

Mooring bollards and bitts for securing lines on deck, cast or welded, selected by working load.

Price on request5-15 working days

03 · Deck and mooring equipment

Hydraulic deck winch

Hydraulically driven deck winch with a drum and brake, for mooring and handling work on deck.

Price on request10-25 working days

05 · Safety and LSA

Enclosed lifeboat

Totally enclosed GRP lifeboat for crew evacuation, built to SOLAS.

Price on request10-25 working days

05 · Safety and LSA

Inflatable life raft

Throw-over inflatable life raft, packed in a container or valise, with an emergency pack, to SOLAS.

Price on requestex-stock, 24-48 h

05 · Safety and LSA

Life jacket

Foam life jacket with retro-reflective tape, whistle and light, in adult and child sizes, to SOLAS.

Price on requestex-stock, 24-48 h

05 · Safety and LSA

Fire alarm panel

Fire alarm control panel with zone indication, a sounder and detectors, managing shipboard fire detection.

Price on request5-15 working days

05 · Safety and LSA

CO2 fire suppression system

Fixed CO2 fire suppression system for engine rooms and holds, with a cylinder bank, manifold and release control.

Price on request10-25 working days

05 · Safety and LSA

Line-throwing appliance

Rocket line-throwing appliance carrying a line to about 230 m, to SOLAS.

Price on requestex-stock, 24-48 h

05 · Safety and LSA

Smoke detector

Fire-detection smoke detector, optical or ionisation, for the engine room, corridors and accommodation.

Price on requestex-stock, 24-48 h

03 · Deck and mooring equipment

Anchor windlass

Combined anchor and mooring windlass, hydraulic or electric drive, with cable lifter, mooring drum and warping head. Selected by chain calibre and pull, complete with band brake and clutch.

Price on request10-25 working days

02 · Pumps, valves and hydraulics

Fuel and oil purifier

Disc-stack purifier and clarifier separating water and solids from heavy fuel, diesel and lube oil. Complete with drive, feed pump and control, or as an exchange module.

Price on request10-25 working days

02 · Pumps, valves and hydraulics

Hydraulic power unit

Skid-mounted hydraulic power unit with reservoir, motor-pump set, valve block and cooler, feeding winches, windlasses, hatch covers and steering. Frame build with full instrumentation.

Price on request10-25 working days

03 · Deck and mooring equipment

Marine deck crane

Knuckle-boom deck crane, hydraulically driven, for cargo handling, provisioning and over-side work. Selected by lifting capacity and outreach, with winch, slew ring and controls.

Price on request10-25 working days

01 · Engine and propulsion

Marine propeller

Fixed-pitch or controllable-pitch (CPP) propeller, cast in Ni-Al bronze, 3-5 blades, dynamically balanced and finished under class survey. Selected by power, rpm and diameter.

Price on request10-25 working days

05 · Safety and LSA

A-frame rescue boat davit

A-frame davit for launching and recovering the rescue boat and lifeboat, with winch, centrifugal brake and hydrostatic release, built to SOLAS/LSA.

Price on request10-25 working days

02 · Pumps, valves and hydraulics

Marine hydrophore unit

Marine hydrophore set - pressure tank with a pump group, control and fittings, holding pressure in the fresh-water, seawater or sanitary system. Common-frame build, ready to install.

Price on request5-15 working days

03 · Deck and mooring equipment

Accommodation gangway

Accommodation gangway for boarding from the quay, aluminium structure with self-levelling steps, handrails and a platform. Selected by length and working angle.

Price on request10-25 working days

01 · Engine and propulsion

Marine gearbox

Marine reduction-reversing gearbox for the main engine, with hydraulic clutch and output to the propeller shaft. Selected by power, rpm and ratio, complete or as parts.

Price on request5-15 working days